Insert liquid still in the container due to the tank's straight design. Furthermore, the cover is easy to open and close.
Straight one-touch tank SOT
・The tank inside is bottom by straight from A lower entry chamber
For flat design the purchase liquid materials of put-up
Injection possibility to remain.
・One-touch clamp type that Open and close of cover is easy.
・It is available for liquid materials direct injection type.
・It is wide by system with our various valves
We cope with application.
・Customization to application of customer
Possibility.
| Capacity (L) | Model | Dimensions (mm) | Weight
(kg) | Material | Pressure | Attached parts |
|---|
| H | ID (φ) | OD (φ) |
|---|
| 4.6 | SOT-4.6L | 270 | 159 | 165 | 8.7 | SUS304 | 0.5MPa | ・O-ring (fluorine-containing rubber
Silicone gum,
Nitrile rubber,
Butyl rubber)
・Safety valve *
・Quick joint |
|---|
| 5.6 | SOT-5.6L | 320 | 159 | 165 | 9.3 |
|---|
| 6.3 | SOT-6.3L | 360 | 159 | 165 | 9.7 |
|---|
| 12.7 | SOT-12.7L | 417 | 208 | 216 | 17.8 |
|---|
| 21.3 | SOT-21.3L | 448 | 259 | 267 | 25.8 |
|---|
＊Setting pressure 0.5MPa (5kgf/cm2) of safety valve
Temperature control unit
Fluid feed tank
