Needle control valve NCV-10
Line-up which is abundant in Compact-size, light weight, various liquid materials and uses
Line-up which is abundant in Compact-size, light weight, various liquid materials and uses
Needle control valve NCV-10
・Dispense stable with liquid material with filler.
・1 port Discharge pressure setting that conversion from syringe method is easily.
・2 port Discharge pressure setting which is suitable in high precision dispense more.
・Fluoric resin Specifications type that is most suitable for dispense of corrosive high material and anaerobic liquid material, UV materials correspondence type are line-up.
| Model | NCV-10 (standard Specifications) | NCV-10-T (fluoric resin Specifications) | NCV-10-U (UV Specifications) |
|---|
| NCV-10-1P | NCV-10-2P | NCV-10-T-1P | NCV-10-T-2P | NCV-10-U-1P | NCV-10-U-2P |
| Drive system | Air operation rate type |
|---|
| The smallest dispensing volume | 9μL | 8μL | 9μL | 8μL | 9μL | 8μL |
|---|
| Adaptation viscosity | ... 50Pa, s |
|---|
| Operation air Supply pressure is | 0.35 ...
0.5MPa | 0.3 ...
0.5MPa | 0.35 ...
0.5MPa | 0.3 ...
0.5MPa | 0.35 ...
0.5MPa | 0.3 ...
0.5MPa |
|---|
| Liquid material Supply pressure range | Up to 0.5MPa |
|---|
| Maximum reply number of times | 640 times
/min. | 680 times
/min. | 640 times of /min. | 680 times of /min. | 640 times of /min. | 680 times of /min. |
|---|
| Wetted part material | Aluminum, SUS
Fluoric resin
Brass (Ni plating) | SUS (fluoric resin coat)
Fluoric resin | Polyacetal
Fluoric resin
SUS (fluoric resin coat) |
|---|
| Connection diameter | Liquid material supply port | Rc1/8 (Fluid feed successor places an order separately) |
|---|
| Liquid material discharge opening | Lure lock |
|---|
| Operation air | One-touch coupling (with speed controller) for external form φ 6 tube |
|---|
| Weight | 140 g | 160 g | 120 g | 140 g | 120 g | 140 g |
|---|
| Operating temperature limits | 5～60 degrees Celsius |
|---|
| Adaptation liquid material | Low to moderate viscosity
Overall liquid material | Anaerobic materials
Materials with filler | UV materials |
|---|
※ Dispensing volume of this Specifications, adaptation viscosity, the biggest reply number of times, adaptation liquid material are reference levels.
Temperature control unit
Valve
