(   ( English )
Tel 84 0393777211 (杨正飞)  
Home    Product  Musashi Dispenser controller
  Small amount fi  
 

Small amount fixed-quantity musashi dispenser  NANO MASTER SMP-II

It is line-up by low cost type of syringe method plunger musashi dispenser.

It is line-up by low cost type of syringe method plunger dispenser.

Small amount fixed-quantity dispenser <br> NANO MASTER SMP-II・Small amount of 1/10,000 ml at the minimum discharges low viscosity liquid material.

・We realize digital control and Super fine dispensing by measurement method.

・Dripping is dissolved by original plunger mechanism and case back function.

・Consecutive dispense of small amount is possible.

・Number inputs dispensing volume into direct and realizes superior operability, high reproducibility.

・We are equipped with residual quantity detective function.

・General-purpose model dispense head Equipped which is available for 5-50 ml of syringe.

・Syringe uses our reference standard and realizes low running cost.

・Micro syringe Equipped is possible. (special order correspondence)

NameSuper small amount fixed-quantity dispenser NANO MASTER
SMP-II
ModelSMP-2
Controller ModelSMP2-C
Dispensing methodVolume measurement method
Discharge pressure settingMicrocomputer digital Discharge pressure setting
Application liquid materialAnaerobic adhesive, silicone resin, medicinal solution, UV adhesive, volatile liquid materials, flux, ink
Application syringe5, 10, 20, 30, 50 mL of syringe
Dispense modeTimed mode/manual mode, fine mode/normal mode
Dispensing volume set rangeAt the time of 5 mL of syringe choices…0.1-5000.0μL
At the time of 10 mL of syringe choices…0.1-10000.0μL
At the time of 20 mL of syringe choices…0.1-20000.0μL
At the time of 30 mL of syringe choices…0.1-30000.0μL
At the time of 50 mL of syringe choices…0.1-48818.3μL
Main functionAutomatic residual quantity warning, case back, synchronized speed, dispense counter, stopwatch,
Unit indication reshuffling, Japanese-English indication reshuffling
The number of the channels400CH
RS-232C serial communicationPossibility
Input signalWe pre-set dispense, channel reshuffling, dispense mode reshuffling, channel, and channel steps,
Synchronized speed ON
Output signalIs discharging dispense completion/, and (reshuffling type) is busy, among error, residual quantity warning, maintenance under limit,
During electricity, it is change demand, direction of movement
Normal voltage and frequencyAC100-240V    50/60 Hz
Power Consumption55W
Conformity standardCE marking (low voltage order, EMC order), EU RoHS
Head Exterior dimensions W*D*HW50 X D87 X H352.5mm
Head Weight1.8 kg
Controller Exterior dimensions
W*D*H
W300 X D250 X H111mm
Controller Weight4.5 kg

explain_024_smp-2-gaikanzu.jpg

No. 719-720, 7th floor, Thanh Dat 1 Building, No. 3 Le Thanh Tong Street, May To Ward, Ngo Quyen Dis
Tel 84 0393777211 (杨正飞)