Gallon tank GAT

Gallon tank GAT,Lightweight tank perfect for pressure feeding of low viscosity liquid materials

Lightweight tank perfect for pressure feeding of low viscosity liquid materials

Gallon tank GAT

・In from low viscosity in low pressure feeding of viscosity liquid materials

Suitable.

・Be superior to handling ability at light weight; for conveyance

Convenience.

・Simplified mold tank for exclusive use of liquid materials direct injection.

・We cannot open cover at the time of pressurization

Safety structure.

・Customization to application of customer

But, it is possible.

Capacity (L)	Model	External diameter dimensions (mm)		A lower entry chamber (mm)	Weight (kg)	Material	Pressure	Attached parts
Capacity (L)	Model	H	OD	A	Weight (kg)	Material	Pressure	Attached parts
About 11	GAT-3G	378	φ 228	82	3.7	Wetted part: SUS304 Fluoric resin	0.2MPa (2kgf/cm²)	・O-ring (fluorine-containing rubber Silicone gum, Nitrile rubber, Butyl rubber) ・Safety valve ^* ・Quick joint
About 19	GAT-5G	565	φ 228	82	4.3	Wetted part: SUS304 Fluoric resin	0.2MPa (2kgf/cm²)

＊Setting pressure 0.2MPa (2kgf/cm²) of safety valve.

	FDW(DAWEI)
	No. 719-720, 7th floor, Thanh Dat 1 Building， No. 3 Le Thanh Tong Street, May To Ward, Ngo Quyen Dis
	84 0393777211 (Mr Phi)